Great Wall Zigong Colorful

New CVD coated carbide for turning steel parts
GW3025 Groove type, substrate double lifting

Brief introduction

Select high-quality tungsten carbide on the basis of the original brand Powder, optimize the coating process, strictly control the process standard Allowed. High blade surface finish and wear resistance.
For different processing requirements, PF1, PM1, PR1 Equal fine, semi-fine, rough processing new trough series, covering Cover steel parts turning field.

 

Groove profile

-PF1
Steel finishing generation groove type, double front Angle design, improve blade edge strength,In the case of small bad mining, chip breaking is good

 

-PM1
Steel parts semi-finishing generation groove type, double Front corner design + 3D anti-chip table, lift Lift chip breaking effect and avoid sticking chip Like, while improving the impact resistance of the cutting edge Percussion.

 

-PR1
Steel roughing generation groove type, cutting Large range, high cutting edge strength, impact resistance Strong percussion.

 

Should

Great Wall cutting CNMG190608-PF1

A company CNMG190608-PF

Line speed Ve 280m/min

Feed Fn 0.15mm/r

Ap 0.8m in the knife

 

Chengdu Great Wall cutting tools Co., LTD
-- Turning of hardened steel

Hardened steel: has a high hardness, typical difficult to process material, hardness of up to 50-65HRC after quenching. It has high mechanical strength
Degree and anti-fatigue wear ability, widely used in bearing, automobile, mold and other industries.

 

AP105 Series
● Substrate: Preferably high-strength blade substrate, long service life, to provide protection for processing
● Coating: Nanoscale PVD coating, excellent adhesion, excellent wear resistance and high temperature service performance
● Trough series: Trough series full face, covering turning, boring finishing, semi-finishing
● Application: Widely used in hardening steel (HRC55-65) turning processing, can obtain excellent surface quality, to solve the hardening steel processing problems, improve processing efficiency

 

Grade application

brand	coating	Materials
		P	M	K	S	N	H
AP105	PVD						●

 

Workpiece material: bearing steel                   Blade: CNMG120404-BF1
Workpiece hardness: HRC60                               Similar products of company A
Cooling method: dry cut                                  Cutting parameter: Vc=50m/min
                                                                                                          Fn/r = 0.16 mm
Processing type: turning finishing                                                    Ap=0.15mm

 

Recommended slot - negative Angle

 

Main push groove type	Recommended parameter
-BF1	Vc=40-80m/min Fn=0.07-0.2mm/r Ap=0.1-1.5mm
-BF2	Vc=40-80m/min Fn=0.110.25mm/r Ap=0.3-2mm
-BM2	Vc=40-80m/min Fn=0.15-0.4mm/r Ap=1.5-4mm

 

Recommended slot type - Positive Angle

 

Main push groove type	Recommended parameter
-ZMF	Vc=30-60m/min Fn=0.07-0.2mm/r Ap=0.2-1mm

 

Model series - Positive Angle

 

Brand	Model number	IC	S	L	φd	f	Inventory situation
AP105	CCGT060204-ZMF	6.35	2.35	6	2.80	0.4
AP105	CCGT09T304-HPF	9.525	3.97	9	4.40	0.4	★

 

Model series - Negative Angle

Brand	Model number	IC	S	L	φd	T	Inventory situation
AP105	CNGX120408-MD	12.7	4.76	12	5.16	0.8
AP105	TNMG160408-BF1	9.525	4.76	16	3.81	0.8	★
AP105	CNMG120404-BF2	12.7	4.76	12	5.16	0.4	★
AP105	SNMG120404-BF2	12.7	4.76	12	5.16	0.4
AP105	SNMG120408-BF2	12.7	4.76	12	5.16	0.8
AP105	TNMG160404-BF2	9.525	4.76	16	3.81	0.4	★
AP105	TNMG160408-BF2	9.525	4.76	16	3.81	0.8	★
AP105	VNMG160404-BF2	9.525	4.76	16	3.81	0.4	★
AP105	VNMG160408-BF2	9.525	4.76	16	3.81	0.8	★
AP105	WNMG080408-BF2	12.7	4.76	8	5.16	0.8
AP105	WNMG080404-ZPF	12.7	4.76	8	5.16	0.4	★
AP105	CNMG120408-BM1	12.7	4.76	12	5.16	0.8
AP105	TNMG160408-BM1	9.525	4.76	16	3.81	0.8
AP105	VNMG160408-BM1	9.525	4.76	16	3.81	0.8
AP105	WNMG080408-BM1	12.7	4.76	8	5.16	0.8
AP105	DNMG150408-BM1	12.7	4.76	15	5.16	0.8
AP105	TNMG160408-BM2	9.525	4.76	16	3.81	0.8	★
AP105	WNMG080408-BM2	12.7	4.76	8	5.16	0.8	★
AP105	WNMG080408-GF	12.7	4.76	8	5.16	0.8

 

Renqiu Fengruida CNC Technology Co., Ltd. is located in the trade center of Zhonghua Road hardware tools market, Renqiu City, Cangzhou City, Hebei Province. The production plant is located in Lvgongbao Industrial Economic Development Zone. The company takes the customer first service concept and adheres to the principle of honesty and trustworthiness, mutual progress and mutual benefit, so as to achieve common progress.

 

The company mainly focuses on wholesale, supplemented by retail. There are more than 500 national distribution partners, independently producing tungsten steel alloy milling cutters, white steel knives, etc., acting as agents for major brands of CNC blades, tool bars, tool handles and other tools. At the same time, traditional cutting tools are also available, which can meet the ordering needs of all customers and win the trust and support of our customers.